Rohde HMT 600 - Declaration of Conformity; Manufacturer Information; Product Identification; EU Directives and Harmonised Standards Compliance

58 / 207 - EN -
16. Declaration of Conformity
We declare that the relevant and basic requirements of the Machinery Directive 2006/42/EC have been met.
Manufacturer: Helmut ROHDE GmbH
Ried 9
83134 Prutting
Germany
Person resident in the European
Community who is authorised to
compile the relevant technical
documents: Helmut ROHDE GmbH
Stefan Meier
Ried 9
83134 Prutting
Germany
Description and identification of the product
Model: Pottery wheel HMT
Type HMT 600
Purpose: Electrical machine for the manual production of rotationally symmetrical bodies
from plastic ceramic material.
Equipment: Optionally equipped with a seat and / or shelf.
We also declare that the special technical documents have been created.
The protection goals of the following additional EU directives have been met:
2014/30/EU Electromagnetic Compatibility Directive
2014/35/EU Low Voltage Directive
The following harmonised standards were used, among others:
EN 12100:2011-03 Safety of machinery, General principles for design, -
Risk assessment and risk reduction
EN 60204-1:2019-06 Safety of machinery, Electrical equipment of machines,
Part 1: General requirements
EN 60335-1:2012-10 Household and similar electrical appliances,
Part 1: General requirements
The technical documentation can be sent to a national authority following a justified request.
Prutting, November 5th, 2021 Benjamin Rohde (General Manager)
(Place and date)
(Signature)