Network Video Recorder User Manual
64
shown below:
Fig 5-5
[Sub Stream]: Sub-stream is SD channel with low frame rate for every channel, it requires
low network bandwidth.
[All to Sub Stream]: Set all channels as sub-stream.
[Enable Audio]: Enable or disenable the sound of live video.
[Full Screen]: Display the video in full-screen, and the tool bar will be hided; double-click
left mouse button or click right mouse button to exit full screen mode.
[Zoom in]: Select the magnification to amplify the video. Hold the left mouse button to
view the video.
5.3 Remote Playback & Backup
5.3.1 Time Search
Click “SEARCH” button to enter the time search interface, as shown in Fig 5-6.
Step1: Select a certain date and channels which need to search video.
Step2: Press Search button, the searched record information will be displayed in the
data information panel.
Step3: Set the screen display mode and playback start time.
Step4: Click Play button to playback video from the selected time.
Step5: Click the relevant buttons on the screen to control playback (such as pause,
rewind, fast forward, stop, single-frame playback, change channel mode, research, etc).
As shown in Fig 5-7.
To Next Page
Loading...