ROHS QH-NVR - Reboot the System; Alarm Configuration; Sensor

Network Video Recorder User Manual
28
3.2.4.4 Reboot the System
User can enable the timing reboot function of NVR, set reboot date and time, it
supports 3 time configurations. As shown in Fig 3-19:
Fig 3-19
Click “Default” button to restore the default setting; click “Apply” button to save the
setting; click “Exit” button to exit current interface.
3.2.5 Alarm Configuration
Enter into Main MenuSetupAlarm.
Alarm configuration includes four submenus: sensor, motion, other alarm and alarm
out.
3.2.5.1 Sensor
Sensor includes three submenus: basic, alarm handling and schedule.
1. Basic
Fig 3-20