162
Effect/Parameter List
33: 2BND FLANGR (2BAND FLANGER)
A flanger that lets you apply an effect independently to the
low-frequency and high-frequency ranges.
34: 2BND S.FLN
(2BAND STEP FLANGER)
A step flanger that lets you apply an effect independently to
the low-frequency and high-frequency ranges.
High Pre Delay
0.0–100.0 ms
Delay time from when the original
sound is heard to when the high-range
chorus sound is heard
High Rate Mode Hz, note
When this is set to “note,” the effect is
synchronized with the tempo.
HighRate(Hz) 0.05–10.00 Hz
Rate at which the low-range chorus
sound is modulated (Hz)
High Rate ( ) note (*1)
Rate at which the low-range chorus
sound is modulated (note)
High Depth 0–127
Modulation depth for the high-range
chorus sound
High Phase 0–180 deg
Spaciousness of the high-range chorus
sound
Balance
D100:0W–
D0:100W
Volume balance of the original sound
(D) and chorus sound (W)
Level 0–127 Output volume
Assignable Parameters
MFX Control
Balance, Low Rate, HighRate, Low Feedback,
High Feedback
Parameter
Value Description
Split Freq
200–8000 Hz
Frequency at which the low and high
ranges will be divided
Low Pre Delay 0.0–100.0 ms
Delay time from when the original
sound is heard to when the low-range
flanger sound is heard
Low Rate Mode Hz, note
When this is set to “note,” the effect is
synchronized with the tempo.
Low Rate(Hz) 0.05–10.00 Hz
Rate at which the low-range flanger
sound is modulated (Hz)
Low Rate ( ) note (*1)
Rate at which the low-range flanger
sound is modulated (note)
Low Depth 0–127
Modulation depth for the low-range
flanger sound
Low Phase 0–180 deg
Spaciousness of the low-range flanger
sound
Low Feedback -98– +98%
Proportion of the low-range flanger
sound that is to be returned to the input
(negative values invert the phase)
High Pre Delay 0.0–100.0 ms
Delay time from when the original
sound is heard to when the high-range
flanger sound is heard
High Rate Mode Hz, note
When this is set to “note,” the effect is
synchronized with the tempo.
HighRate(Hz) 0.05–10.00 Hz
Rate at which the high-range flanger
sound is modulated (Hz)
High Rate ( ) note (*1)
Rate at which the high-range flanger
sound is modulated (note)
High Depth 0–127
Modulation depth for the high-range
flanger sound
High Phase 0–180 deg
Spaciousness of the high-range
flanger sound
High Feedback -98– +98%
Proportion of the high-range flanger
sound that is to be returned to the input
(negative values invert the phase)
Balance
D100:0W–
D0:100W
Volume balance of the original sound
(D) and flanger sound (W)
Level 0–127 Output volume
Parameter
Value Description
Assignable Parameters
MFX Control LoStp Rt, HiStp Rt, Low Feedback, Hi Feedback, Balance
Parameter
Value Description
Split Freq
200–8000 Hz
Frequency at which the low and high
ranges will be divided
Low Pre Delay 0.0–100.0 ms
Delay time from when the original
sound is heard to when the low-range
flanger sound is heard
Low Rate Mode Hz, note
When this is set to “note,” the effect is
synchronized with the tempo.
Low Rate(Hz) 0.05–10.00 Hz
Rate at which the low-range flanger
sound is modulated (Hz)
Low Rate ( ) note (*1)
Rate at which the low-range flanger
sound is modulated (note)
Low Depth 0–127
Modulation depth for the low-range
flanger sound
Low Phase 0–180 deg
Spaciousness of the low-range flanger
sound
Low Feedback -98– +98%
Proportion of the low-range flanger
sound that is to be returned to the input
(negative values invert the phase)
LoStp Mode Hz, note
When this is set to “note,” the effect is
synchronized with the tempo.
LoStp Rt(Hz) 0.10–20.00 Hz
Rate at which the steps will cycle for
the low-range flanger sound (Hz)
LoStp Rt( ) note (*1)
Rate at which the steps will cycle for
the low-range flanger sound (note)
Hi Pre Delay 0.0–100.0 ms
Delay time from when the original
sound is heard to when the high-range
flanger sound is heard
Hi Rate Mode Hz, note
When this is set to “note,” the effect is
synchronized with the tempo.
Hi Rate (Hz) 0.05–10.00 Hz
Rate at which the high-range flanger
sound is modulated (Hz)
Hi Rate ( ) note (*1)
Rate at which the high-range flanger
sound is modulated (note)
Hi Depth 0–127
Modulation depth for the high-range
flanger sound
Hi Phase 0–180 deg
Spaciousness of the high-range
flanger sound
Hi Feedback -98– +98%
Proportion of the high-range flanger
sound that is to be returned to the input
(negative values invert the phase)
HiStp Mode Hz, note
When this is set to “note,” the effect is
synchronized with the tempo.
HiStp Rt(Hz) 0.10–20.00 Hz
Rate at which the steps will cycle for
the high-range flanger sound (Hz)
HiStp Rt( ) note (*1)
Rate at which the steps will cycle for
the high-range flanger sound (note)
Balance
D100:0W–
D0:100W
Volume balance of the original sound
(D) and flanger sound (W)
Level 0–127 Output volume
RD-700GX_e.book 162 ページ ２００８年２月１３日 水曜日 午後５時４９分
To Next Page
Loading...
Need help?
General
