Roland SP-404MK - Mixing Samples (DJ MODE); Assigning and Mixing Samples

MixingtheSamples(DJMODE)
YoucanassigntwosamplestoCH1andCH2andmixthemfreely.
Pressthebank[D/I]buttonandthe[E/J]buttonsimultaneously.
TheunitentersDJMIXERmode.
1
SelectthesamplestorespectivelyassigntoCH1andCH2.
2
Pressthe[VALUE]knob.
Amenuappears.
1
Usethe[VALUE]knobtoselect“CH1SELECT”or“CH2SELECT,”andpressthe[VALUE]
knob.
2
Presspads[1]‒[16]toselectthesampletoassigntoeitherCH1orCH2.
Pressapadtopreviewitssample.Youmaynotbeabletohearthesamplesatthistimeif
theCH1LEVELorCH2LEVEListoolow.Turnthe[CTRL1]or[CTRL2]knobstoadjust
thevolume.
3
Usethe[VALUE]knobtoselect“ENTER,”andpressthe[VALUE]knob.
4
OnceyouʼveassignedasampletoCH1,usethesameoperationtoassignasampleto
CH2.
5
Usethe[CTRL1]‒[CTRL3]knobsandpresspads[1]‒[16]tomixthesound.
3