Roland SP-404MK - Enabling a Custom Screen Saver

CustomizingThisUnit > CustomizingtheScreenSaver
EnablingaCustomScreenSaver
Thisshowshowyoucanloadacustomimageasascreensaver(the“ScreenSaverType”parameter).
Holddownthe[SHIFT]buttonandpressthepad[13].
TheUTILITYMENUscreenappears.
1
Usethe[VALUE]knobtoselect“SYSTEM,”andpressthe[VALUE]knob.
Thesystemscreenappears.
2
Turnthe[CTRL3]knobtoselectthe“GENERAL”tab.
3
Usethe[VALUE]knobtomovethecursorto“ScreenSaverType,”andpressthe[VALUE]knob.
Thevaluedisplayishighlighted,andyoucannoweditthevalue.
4
Usethe[VALUE]knobtoselect“Custom,”andpressthe[VALUE]knob.
5
Pressthe[EXIT]button.
6