Roland SP-404MK - Saving Screen Saver Image to Project

CustomizingThisUnit > CustomizingtheScreenSaver
SavingtheScreenSaverImagetoaProject
Hereʼshowtosaveyourcustomimagetoaproject.Asanexample,thefollowingshowshowtoeditthecustomimage
forthescreensaverofproject01.
Preparetheimagetouseforthescreensaver,andeditthesettingstouseacustomscreensaver
(“PreparingaScreenSaverImage”and“EnablingaCustomScreenSaver”).
1
Exporttheprojectforwhichyouwanttochangethescreensaver(project01inthisexample)toanSD
card(“ExportingaProject(EXPORTPROJECT)”).
2
RemovetheSDcardfromthisunit,andopenthecontentsonyourcomputer.
3
CopythescreensaverimagethatʼssavedintheSDcardtothe
“EXPORT/PROJECT/PROJECT01/PICTURE”folder.Changethefilenameto“screensaver*.bmp”,
replacingtheasteriskwithanumberfrom1to16.
Fordetailsonthe“/EXPORT/PROJECT/PROJECT01/PICTURE”folder,seethefolderstructurediagram
shownin“Importing/Exporting(UsingtheSDCard).”
4
RemovetheSDcardfromyourcomputer,andinsertitintothisunit.
5
Importthescreensaverimageintotheprojectwhereitwasregistered(“ImportingaProject(IMPORT
PROJECT)”).
Thescreensaverthatusesyourcustomscreensaverisshown.
6