Roland SP-404MK - Importing a Project

ConfiguringtheVariousSettings(UTILITY) > Importing/Exporting(UsingtheSDCard)
ImportingaProject(IMPORTPROJECT)
YoucanimportaprojectintothisunitthatwascreatedonadifferentSP-404MKⅡandexportedtoanSDcard.
Followthestepsin“ExportingaProject(EXPORTPROJECT)”toexporttheproject(s)toanSDcard.
1
InserttheSDcardonwhichtheprojectsaresavedintotheSDcardslotofthisunit.
2
Holddownthe[SHIFT]buttonandpressthepad[13].
TheUTILITYMENUscreenappears.
3
Turnthe[VALUE]knobtoselect“IMPORT.”
TheIMPORT/EXPORTMENUscreenappears.
Fromthetopscreen,youcanalsomakethisscreenappearbypressingpad[14]whileholdingdownthe
[SHIFT]button.
4
Usethe[VALUE]knobtoselect“IMPORTfromSD-CARD,”andpressthe[VALUE]knob.
TheIMPORTSAMPLE/PROJECTscreenappears.
5
Usethe[VALUE]knobtoselect“PROJECT,”andpressthe[VALUE]knob.
6
Pressthe[ROLL]button.
Thecontentsofthe“EXPORT”folderareshown.Thecontentsoftheprojectfolder(PROJECT**)that
wasexportedtotheSDcardareshown.
Thecontentsofthe“IMPORT”folderareshownfirstonthescreenwhereyouselecttheprojectto
import.Eachtimeyoupressthe[ROLL]button,theviewswitchesbetweenthe“IMPORT”and
“EXPORT”folders.
7