Roland SP-404MK - Page 136

NeverturnoffthepowerorremovetheSDcardwhilethescreenindicates“Working...”
“EXPORT”folders.
Fromyourcomputer,youcanselecttheprojecttoexportfromthe“IMPORT”folderlistscreen.
OpentheSDcardonyourcomputer.
1
Movetheexportedprojectfolder(PROJECT**)fromthe“EXPORT”foldertothe
“IMPORT”folder(Importing/Exporting(UsingtheSDCard)).
2
Presspads[1]‒[16]toselecttheprojectnumbertoimport.
Normally,youshouldselectapadthatʼsblinkingyellow(anemptypad).
Pad
status
Explanation
Unlit
(dark
orange)
Projectnumberthatalreadycontainsaproject
Blinking
yellow
Projectnumberforwhichaprojecthasnʼtbeencreated(emptyproject)
Blinking
red
Projectnumbertowhichtheimportedprojectissaved
Litred Projectnumbertowhichtheimportedprojectissaved(ifaprojectalreadyexistsat
thatprojectnumber,itisoverwrittenwiththenewlyimportedproject)
8
Turnthe[VALUE]knobtoselecttheprojecttoimport,andpressthe[VALUE]knob.
Theprojectisnowimported.
Whenyouimportaprojecttoaprojectnumberthatalreadycontainsaproject(thepadlightsupred),a
messageisshowntoconfirmtheoverwrite-save.
Toimportandoverwrite,turnthe[VALUE]knobtoselect“OK,”andpressthe[VALUE]knob.
Performingthisoperationoverwrites(erases)theprojectintheimportdestination.
9