Roland SP-404MK - Exporting a Project

ConfiguringtheVariousSettings(UTILITY) > Importing/Exporting(UsingtheSDCard)
ExportingaProject(EXPORTPROJECT)
YoucanexportprojectstoanSDcardifyouwanttousethemonanotherSP-404MKⅡ.
NeverturnoffthepowerorremovetheSDcardwhilethescreenindicates“Working...”
InserttheSDcardtowhichthesamplesaretobeexportedintotheSDcardslotofthisunit.
1
Holddownthe[SHIFT]buttonandpressthepad[13].
TheUTILITYMENUscreenappears.
2
Turnthe[VALUE]knobtoselect“IMPORT.”
TheIMPORT/EXPORTMENUscreenappears.
Fromthetopscreen,youcanalsomakethisscreenappearbypressingpad[14]whileholdingdownthe
[SHIFT]button.
3
Usethe[VALUE]knobtoselect“EXPORTtoSD-CARD,”andpressthe[VALUE]knob.
TheEXPORTSAMPLE/PROJECTscreenappears.
4
Usethe[VALUE]knobtoselect“PROJECT,”andpressthe[VALUE]knob.
5
PressthepadsoftheprojectsthatyouwanttoexporttotheSDcard.
Thepadslightuporange.
Padstatus Explanation
Unlit(darkorange) Padforwhichaprojecthasnʼtbeencreated(emptypad)
Blinkingorange Padforwhichaprojecthasbeencreated
Litorange PadcontainingaprojecttobeexportedtoSDcard(padtoexport)
Youcanalsoselectmultipleprojects(pads)toexport.Whendoingso,ifyoudecidenottoexporta
certainproject,pressitspadagaintodeselectit(thepadblinksorange).
6
Afteryouʼveselectedtheprojectstoexport,pressthe[VALUE]knob.
Theselectedprojectsaresavedinthe“EXPORTPROJECT”folderoftheSDcard(Importing/Exporting
(UsingtheSDCard)).
7