Roland SP-404MK - Adding Count-in Before Recording

CombiningSamplestoCreateaPattern(PATTERNSEQUENCER) > CreatingaNewPattern
AddingaCount-inBeforeRecordingaPattern
Thisfeatureaddsacount-inbeforethepatternstartrecording.Thisgivesyoutimetogetreadytoplaybeforethe
patternactuallybeginsrecording.
Holddownthe[SHIFT]buttonandpressthepad[10].
Editthecount-insetting.
Value Explanation
COUNTIN1MEAS Addsaone-measurecount-inbeforerecording.
COUNTIN2MEAS Addsatwo-measurecount-inbeforerecording.
COUNTINWAIT Recordingstartsalongwithsampleplayback.
COUNTINOFF Nocount-inisused.Pressthe[REC]buttontoimmediatelybeginrecording.
Thevaluechangesinordereachtimeyoupresspad[10]whileholdingdownthe[SHIFT]button.
1