Rosemount 3095FB - Page 75

Model 3095FB Multivariable Transmitter with Modbus Protocol
Modbus Protocol Guide
Page 44 of 79
Table 5-16 RTD Present
Modbus Access
DESCRIPTION
Address
Address
Type
Attributes
Functional
Area
Data / Control
0004 Coil R/W, WP RTD present (0=not present, 1 =
present)
*Attributes: R/W = Read/Write, RO = Read Only, WP = Write Protected
**These registers are available at multiple Modbus addresses (see Section 2.3 located in
the Modbus Protocol Guide)
Table 5-17 User Entered PT Value
Modbus Access
DESCRIPTION
Address
Address
Type
Attributes
Functional
Area
Data / Control
0455,
0456
FP register R/W, WP User Entered PT Value
Default = 60
o
F
*Attributes: R/W = Read/Write, RO = Read Only, WP = Write Protected
**These registers are available at multiple Modbus addresses (see Section 2.3 located in
the Modbus Protocol Guide)