Ross Ultritouch - Sources for the Soft Panel

Ultritouch+Ultrix User Guide (v1.0) Creating a Soft Panel for Ultritouch • 23
6. Use the provided buttons beside the Assigned list to determine the order in which the destinations are
displayed on the soft panel.
7. Click
Apply at the bottom of the Panels tab to save your settings.
Sources for the Soft Panel
You can create a soft panel with a specified number of sources and determine the order in which they are displayed
in the Sources window of the panel. For example, the router may have 64 sources but you only want to make the
first 12 inputs selectable on the soft panel. You would then move only the required sources from the Available list to
the Assigned list.
To specify the sources for the soft panel
1. Double-click the panel name from the Panels list in the left toolbar of the Panels tab.
2. Click
Sources.
3. To add a source to the soft panel:
a. From the Available list, select the source(s) you wish to add to the soft panel.
b. Click .
The Assigned list updates to include the selected source(s).
4. To assign all the available sources in the database to the soft panel, click .
5. To assign multiple sources to the soft panel:
a. From the Available list, select the first source you wish to add to the soft panel.
b. Press
Shift.
c. From the Available list, select the other source(s) you wish to add to the soft panel.
d. Click .
The Assigned list updates to include the selected sources.
6. Use the provided buttons beside the Assigned list to determine the order in which the sources are displayed on
the soft panel.
7. Click
Apply at the bottom of the Panels tab to save your settings.