Rosslare AYC-E60B User Manual

Controller Operation
56 AYC-E/Q60 Series Installation and Programming Manual
 Present your user card that you want to assign as the Primary
or Secondary code for this slot number.
If the PIN or user card presented is valid, the left LED stops
flashing and the controller is ready for you to enter the next
3-digit slot number (refer to Step
3) for the slot to which you
want to assign a code.
5. Do one of the following:
 Press # to move to the next available user slot number.
 Enter another 3-digit user slot number.
 If you do not wish to continue enrolling codes, press # twice
and the controller returns to Normal mode.
5.9.13.5 Enrolling Secondary Codes using the Code Search
Method
The Code Search feature enables you to quickly enroll a Secondary
code to a user who already has a Primary code.
To enroll secondary codes using the Code Search method:
1. Enter Programming mode.
2. Press 7 to enter Menu 7.
The right LED turns orange.
3. Enter 000 as the 3-digit user slot number.
The right LED flashes orange.
Orange
Orange
Green

Rosslare AYC-E60B Specifications

General

Brand	Rosslare
Model	AYC-E60B
Category	Card Reader
Language	English