d05780.fm
INSTALLATION MANUAL
BRP-Powertrain
Effectivity: 912 i Series
Edition 1/Rev. 2
00-00-00
page 11
January 01/2014
4) Safety notice
General note Although the reading of such information does not eliminate the hazard,
it promotes the understanding and application of the information con-
tained here in for correct use of the engine. Always use common work-
shop safety practice.
The information and components system descriptions contained in this
Manual are correct at the time of publication. BRP-Powertrain maintains
a policy of continuous improvement of its products without imposing upon
itself any obligation to install them on its products previously manufac-
tured.
Revision BRP-Powertrain reserves the right at any time, and without incurring obli-
gation, to remove, replace or discontinue any design, specification, fea-
ture or otherwise.
Measure Specifications are given in the SI metric system with the USA equivalent
in parenthesis.
Symbols used This Manual uses the following symbols to emphasize particular informa-
tion. This information is important and must be observed.
NOTE: Indicates supplementary information which may be need-
ed to fully complete or understand an instruction.
A revision bar outside of the page margin indicates a
change to text or graphic.
Identifies an instruction which, if not followed, may
cause serious injury including the possibility of death.
Identifies an instruction which, if not followed, may
cause minor or moderate injury.
Denotes an instruction which, if not followed, may se-
verely damage the engine or other component.
Environmental notes give you tips on environmental behavior.
This information gives you additional advice and tips.
To Next Page
Loading...
