Rotax 912 i series Installation Manual

d05780.fm
INSTALLATION MANUAL
BRP-Powertrain
Effectivity: 912 i Series
Edition 1/Rev. 0
00-00-00
page 16
January 01/2012
Reference
Any reference to a document refers to the latest edition issued by
BRP-Powertrain, if not stated otherwise.
Illustrations The illustrations in this Manual are mere sketches and show a typical
arrangement. They may not represent in full detail or the exact shape of
the parts which have the same or similar function. Therefore deduction of
dimensions or other details from illustrations is not permitted.
NOTE: The Illustrations in this Manual are stored in a graphic data
base system and are provided with a consecutive irrelevant
number.
This number (e.g. 00277) is of no significance for the con-
tent.
Installation
drawings
Installation drawings and a DMU-model for (virtual) installation analysis
are available from the ROTAX Authorized Distributors or their Service
Centers.

WARNUNG
NOTICE
This Manual for engine installation is only part of the
Technical Documentation and will be supplemented by
the respective Operators Manual, Maintenance Manu-
al and Illustrated Parts Catalog.
Pay attention to references to other documentation,
found in various parts of this Manual.

Rotax 912 i series Specifications

General

Number of Cylinders	4
Max Power	100 hp (73.5 kW)
Max Power Output RPM	5800 rpm
Ignition System	Dual electronic ignition
Oil System	Dry sump, forced lubrication with separate oil tank
Reduction Gear Ratio	2.43:1
TBO	2000 hours
Engine Type	4-stroke, horizontally opposed
Displacement	1352 cm³
Bore x Stroke	84 mm x 61 mm
Max Torque	128 Nm
Fuel Type	Avgas 100LL or unleaded automotive gasoline
Fuel System	Electronic fuel injection
Cooling System	Liquid/air-cooled