Installation manual
24
RKHBH/X008AA
Indoor unit for air to water heat pump system
4PW50203-1A
C Alarm output logic of EKRP1HB
00 Not applicable. Do not change the default value! 0 — — —
01 Output logic of the EKRP1HB remote alarm
input/output PCB
0 0/1 — —
D Benefit kWh rate power supply
00 Switching off heaters 0 0/1/2/3 — —
01 Unit connection to benefit kWh rate power supply 0 (OFF) 0/1/2 — —
02 Not applicable. Do not change the default value! 0 — — —
E Unit information readout
00 Software version Read
only
———
01 EEPROM version Read
only
———
02 Unit model identification Read
only
———
03 Liquid refrigerant temperature Read
only
——°C
04 Inlet water temperature Read
only
——°C
First
code
Second
code
Setting name
Installer setting at variance with default value
Default
value
Range Step UnitDate Value Date Value
1D_IM_4PW50203-1A.book Page 24 Thursday, January 29, 2009 10:51 AM
To Next Page
Loading...
