Rover ST2 - Page 11

pag. 11
ST2 User’s Manual
Introduction
“VOLUME” (Volume level setting):
Press key to modify the meter volume intensity
• 0%
• 20%
• 40%
• 60%
• 80%
• 100%
continue: CONFIGURATION MENU
Auto Shut off time when no key is pressed: OFF,
5 min., 10 min.
Measurement unit: dBμV, dBmV, dBm
available languages
key pressed BEEP sound status: Low, Medium,
High and OFF.
and press the key to access the menu
“METER SET UP” :
Display backlight:Full ON (always on), 30 sec
(shuts off 30 sec after the last key was pressed).
Referring to fi g. 1.0, press key
to choose the “METER SETUP” menu entry
“TV CONFIGUR. COUNTRY” (TV canalisation and standard):
and press the
Referring to Fig. 1.0, press key
to select the “TV CONFIG. & COUNTRY” menu entry
List of all the available prememorized
standard canalisations (see. also
to the paragraph “Useful Sugge-
stions”: “ Analyser Pre-memorised
canalisations”)
from 0 to 2500 MHz
key to access the menu
Level - Tilt - Aud/Lev