pag. 61
ST2 User’s Manual
2.3 WARNINGS
a) Do not use the instrument during the up-grade procedure.
b) If the up-grade procedure does not work check connections and repeat the
operation
c) If the operation continues to fail, contact Ro.Ve.R Laboratories SpA
(info@roverinstruments.it).
*All logos are registered by their owners.
3.0 GET SCREEN
This function allows you to transfer any data display from your instrument to a PC.
3.1.1 HOW TO TRANSFER A DISPLAY FROM INSTRUMENT TO PC
a) Connect your instrument to a PC by following the procedure described in
paragraph 1.0.
b) Click on “Tools” and “Get Screen” on the instrument bar.
c) Wait for the display to appear on the PC monitor.
3.1.2 HOW TO PRINT THE DISPLAY
a) Click on “File” on the instrument bar and select “Print Setup”.
b) Confi gure the print settings and press “OK” to confi rm.
3.1.3 HOW TO SAVE THE DISPLAY
a) Click on “File” on the instrument bar and select “Save as”.
b) Chose a location where you want to save the fi le and press “Save”.
c) SMART will save the display obtained from the meter in bitmap format.
3.2 NOTES
a) Pictures are saved with fi le type .bmp (Bitmap),
b) Only the spectrums and measurements graphics, generated by the
instrument, can be transferred to the PC; demodulated television pictures
can not be transferred.
3.3 WARNINGS
a) If this operation continues to fail, contact Ro.Ve.R Laboratories SpA
(info@roverinstruments.it).
continues: SMART PROGRAMME
To Next Page
Loading...
