Rover ST2 - Page 62

pag. 62
ST2 User’s Manual
4.0 “INSTRUMENT FILE MANAGER” (DATA LOGGER TRANSFER)
This operation allows you to transfer a Data Logger from your measuring instrument to
a PC and then print it or save it in a fi le.
4.1.1 HOW TO TRANSFER A DATA LOGGER
a) Connect your instrument to a PC by following the procedure described in
paragraph 1.0,
b) Click on “Instrument” on the instrument bar and select “Instrument fi le
manager”,
c) Wait for the fi le list to download on the PC,
d) The folder Read File will be shown on the screen. Open the Logger folder,
e) All logger fi les will be listed,
f) Click twice on a fi le logger to visualise it
4.1.2 HOW TO PRINT A FILE LOGGER
a) Open the Logger folder,
b) Select and open the Logger fi le you want to print,
c) Click on “File” on the instrument bar and select “Print”,
d) Confi gure the print settings and press “OK” to confi rm.
4.1.3 HOW TO SAVE A DATA LOGGER ON A PC
a) Open a Logger fi le,
b) Select and open the Logger fi le you want to save,
c) Click on “File” on the instrument bar and select “Save as”,
d) Chose the location where you want to save the fi le and press “Save”.
4.1.4 HOW TO DELETE A DATA LOGGER
a)Open the Logger folder,
b) Select from the “Instrument File Manager” window the logger fi le you want
to delete,
c) Press the “Delete” key in the “Instrument File Manager” window,
d) The fi le will be cancelled on instrument.
4.1.5 HOW TO EXPORT A DATA LOGGER IN AN EXCEL SPREADSHEET
a) Open the Logger folder,
b) Select and open the Logger fi le you want to export,
c) Click on “File” on the instrument bar and select “Export”,
d) In the open window, name the fi le and chose the location where you want
to save it,
e) Chose fi le type .XLS,
f) Select “Save”,
g) The Logger fi le will be saved in Excel format in the form of a table.
continues: SMART PROGRAMME