Rover ST2 - Page 63

pag. 63
ST2 User’s Manual
5.0 INSTRUMENT FILE MANAGER (MEMORY PLAN MANAGEMENT)
This function allows you to transfer and manage a Memory Plan on your PC in order to
be able to modify and print it.
5.1.1 HOW TO TRANSFER A MEMORY PLAN FROM YOUR METER TO A PC
a) Connect your instrument to a PC as described in paragraph 1.0
b) Click on “Instrument” on the instrument bar and select “Instrument File
Manager”.
c) Wait for the complete fi le list to download on to your PC.
d) The “Instrument File Manager” will appear on the screen. Open the “Mem.
Plan” folder required by clicking twice.
e) All memory fi les will be listed.
5.1.2 HOW TO MODIFY A MEMORY PLAN
HOW TO MODIFY AN EXISTING PROGRAM
a) Select and open the Memory fi le you want to edit,
b) Click twice on the line relative to the program you want to edit,
c) The program opens a window where you can modify all the parameters of
the chosen program.
HOW TO ADD A PROGRAM
a) Using the right-hand key on your mouse, click on the line you want to modify
and select “Add”,
b) Carry out the settings of the new program in the window that opens,
c)Press “Ok” to confi rm the addition of a program.
5.1.3 HOW TO TRANSFER A MEMORY PLAN FROM A PC TO AN INSTRUMENT
a) Once you have carried out the modifi cation, following the procedure descri-
bed in paragraph 5.1.2, click on the “Instrument-PC” key in the MEM. PLAN
Properties section (on the right of the screen) to transfer a memory plan
from a PC to your instrument,
b) The memory plan will load in the instrument.
5.1.4 HOW TO PRINT A MEMORY PLAN
a) Select and open the Memory fi le you want to print (See 7.2.1),
b) Click on “Instrument” on the instrument bar and select “Print”,
c) Confi gure the print settings and press “OK” to confi rm.
continues: SMART PROGRAMME