BC-3500 Bill and Coin Changer
4-8 25238801
REJECT - VI AGAIN
Symptom:
A second bill was inserted while validating the first bill.
This is a reject message.
A bill was rejected because the VI cell was covered while the changer was in the process of validating a bill.
Wait until the changer completes the cycle before you insert the next bill.
If bills are rejected frequently with this code, the VI cell may be giving an intermittent signal.
Corrective Action:
1. Check the VI cell for proper switching. If the cell is OK, check the wiring from the VI cell to the CCC (P4 -
Pin 14) for an intermittent open connection.
2. If both of the preceding checks are OK, replace the CCC.
If the bill is left in the transport for five seconds, the bill changer will go into SELF-CLEAR.