Appendix A: Calculating State Tax Table Codes
128 Alpha 600/601 User’s Guide
In PRG position, type the individual breakpoints of the Regular
breakpoint pattern and press the Tax 2 key after each breakpoint. Place
the number 10 before the last breakpoint entry.
Using The Worksheet, complete Step F.
7 For the following, see the Example Tax Chart, Step G:
To summarize the steps taken in calculating and programming the State
Tax Table Code, combine Steps A through F and maintain for future
reference.
Note
Programming the State Tax Table Code is done with the Mode key in the
PRG position.
121, Tax 2, 240096, Tax 2, 13, Tax 2, 19, Tax 2, 23, Tax 2, 23, Tax 2,
27, Tax 2, 27, Tax 2, 1029, Tax 2, 25, Tax 2, 25, Tax 2, 25, Tax 2, 1025,
Tax 2.
Using The Worksheet, complete Step G by using the method described.
Table 24 Example: Regular breakpoint sequence 25, 25, 25, 1025
Type... Press... Appears as...
25 Tax 2 0.25
25 Tax 2 0.25
25 Tax 2 0.25
1025 Tax 2 10.25
To Next Page
