Royal 601sc - Programming Coupon Discounts

Alpha 600/601 User’s Guide 61
Programming Discounts
After you are done, you can check your results. See Running the Program
Confirmation Report on page 80.
To program a Minus Percentage Discount [-%/ra]
Example 16: Program the Percentage Discount rate of 10%
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
and then press the Check key. If you did not program a Manager
Password, go to the next step.
3 Using the round Number keys, press 1000 0 and then press the -%/RA
key.
You must always enter the percentage rate as a 4-digit number without
the decimal point, representing 00.00 through 99.99.
Note
See Minus Percentage Discount Sale on page 112 to ring up a Minus
Percentage Discount sale.
Programming Coupon Discounts
You can use the Coupon Discount (CPN) key to subtract a specific amount
from an individual item. You can enter a coupon in the middle of a
transaction or by itself in a transaction.
After you are done, you can check your results. See Running the Program
Confirmation Report on page 80.
Programming the Coupon Discount key includes 2 steps:
1 Setting a High Digit Lock Out (HDLO) number
The High Digit Lock Out (HDLO) number limits the number of digits
that can be rung up in a coupon discount. This prevents you from
accidentally subtracting a large amount.
If large number of digits is entered, you hear an error beep and the
keypad locks up. For example: To make sure no one can ring up more
than $99.99 on the Coupon Discount key, set the HDLO to 4.
Table 17 High digit lockout number (HDLO)
This number... From this... to this...
0 $ .01 $ 99,999.99 (Standard setting)
1.01 .09
2.01 .99