Chapter 4: Setting Up Your Cash Register - the Basics
30 Alpha 600/601 User’s Guide
2 If you are prompted for a Manager Password, type the password number
and then press the Check key. If you did not program a Manager
Password, go to the next step.
3 For the 1st line, do the following:
• Using the round Number keys area, press 31.
• Press the Return key. The header line 1 appears on the display.
• Enter the 1st line of the header, up to 24 characters and then press the
Check key.
4 If you want a 2nd line, do the following:
• Using the round Number keys area, press 32.
• Press the Return key. Header line 2 appears on the display.
• Enter the 2nd line of the header, up to 24 characters and then press the
Check key.
5 If you want a 3rd line, do the following:
• Using the round Number keys area, press 33.
• Press the Return key. Header line 3 appears on the display.
• Enter the 3rd line of the header, up to 24 characters and then press the
Check key.
6 If you want a 4th line, do the following:
• Using the round Number keys area, press 34.
• Press the Return key. Header line 4 appears on the display.
• Enter the 4th line of the header, up to 24 characters and then press the
Check key.
7 If you want a 5th line, do the following:
• Using the round Number keys area, press 35.
• Press the Return key. Header line 5 appears on the display.
• Enter the 5th line of the header, up to 24 characters and then press the
Check key.
8 When you are done, turn the Mode key to Off.
Setting the Footer Message
You can also program a message that automatically prints at the bottom of
the receipt. For example, you can list your hours of operation, return
policy, or a special promotion at the bottom of every receipt. You can set
Flag #37 to print the Footer message or skip the Footer message
completely (none of the 5-lines print)
To Next Page
Loading...
