Chapter 8: Running Reports
92 Alpha 600/601 User’s Guide
Print an End-of-Day Electronic Journal Report
You can print the Electronic Journal Z report at the end of the day. This
report prints all transactions and clears the memory.
To print in the Z Mode
1 Turn the Mode key to the Z position.
2 Run the normal end-of-day reports, including a standard Z Report by
pressing the Amount Tend Total key while in Z Mode.
3 Using the round Number keys area, press 96 to print the Electronic
Journal record.
4 Press the Amount Tend Total key.
The Electronic Journal record prints and the Electronic Journal memory
is cleared.
Note
If you see a EJ - FULL ERROR message on the cash register, go to EJ
-FULL Error on page 100 for help on what to do.
Check the Electronic Journal Memory
To check the current status of the Electronic Journal memory for the
number of lines used in memory and how many lines remain free:
1 Put the PRG key in the Mode key slot and turn it to either the REG1 or
REG2 position.
2 Press the QTY/DATE key twice. The first press displays the date only.
3 The memory status with the number of lines that the memory can still
accept appear on the operator display.
To Next Page
Loading...
