Need help?Do you have a question about the RT Systems TM3 and is the answer not in the manual?
General| Brand | RT Systems |
|---|---|
| Model | TM3 |
| Category | Measuring Instruments |
| Language | English |
Overview of the TM3 Monitoring Unit's capabilities and connectivity.
Summary of the manual's content and purpose.
Details on the unit's compliance with IEC specifications.
List of additional resources for users.
Identification and description of front panel controls and indicators.
Details of physical ports and connectors on the rear of the unit.
List of items included in the TM3 Monitoring Unit shipment.
Description of sensors and accessories not included in the base unit.
Guidelines for physically mounting the unit in a rack.
Procedure for connecting essential cables and antenna.
How to connect temperature, flood, and dry contact devices.
Specifics for connecting 4-20mA sensors and relay outputs.
Essential settings needed before operational use.
Procedure to configure the unit's internal clock.
Steps to establish communication for initial setup.
Configuring the unit for GSM communication.
Handling SIM card PIN and PUK codes.
Initial IP address, subnet mask, and gateway details.
Setting up IP address, subnet mask, gateway, and DNS.
Setting up contact numbers for SMS alerts.
Defining which alarms trigger SMS messages to specific contacts.
Configuring alarms for dry contact inputs and their descriptions.
Configuring thresholds and SMS transmission for analogue sensors.
Assigning names and identifiers to analogue inputs.
Configuring zero/full scale values and alarm levels for 4-20mA sensors.
Configuring the automated weekly self-test schedule and email results.
Setting hysteresis, thresholds, and sampling for temperature sensors.
Scheduling daily reports for disabled alarms.
Scheduling daily reports for uncleared alarms.
Configuring site ID and discrete alarm delay times.
Configuring the IP address for connected cameras.
Setting up SNMP manager addresses, versions, and user credentials.
Managing administrator and user passwords and auto log out.
How to safely log out of the web interface.
Using the TEMP key to configure sensor thresholds.
Initiating and interpreting the unit's self-test results.
Disabling or enabling all alarms from the front panel.
Setting time/date and accessing telemetry data via Enter key.
Understanding SMS command syntax and basic queries.
Commands to query contact information and alarm status.
Commands to retrieve sensor values and thresholds via SMS.
Overview of displayed configuration and alarm status on the home page.
Reviewing past alarm events and their descriptions.
Visualizing sensor data trends over time.
Accessing live camera images from connected cameras.
Overview of SNMP v1 and v3 capabilities and configuration.
Using SNMP to retrieve system information and alarm status.
Guidelines for safe maintenance and description of replaceable parts.
Solutions for initialization, GSM, and SMS problems.
Instructions for unit maintenance and responsible disposal.
Key operating parameters like voltage, dimensions, and environment.
Specifications for power outputs, sensor inputs, and battery life.
Details on regulatory compliance and standards.
To Next Page