RT Systems TM3 - Alarm Profile Configuration

2121
alarm profile configuration page
From the Home Page of the TM3 Monitoring Unit select the Alarm Prole Conguration Page. The alarm proles are congurable on
three separate pages ie, Alarm Prole Matrix 1, Alarm Prole Matrix 2 and Alarm Prole Matrix 3. Each has to be congured in order to
complete the proles for all the alarms. The following page will be displayed for matrix 2:
The following selections can be done:
n Alarm tick boxes A particular alarm can be directed to send an SMS to a specic contact when
ticked in the corresponding Alarm Input vs Contact tick box.
n Select/Deselect All To select or deselect All Alarms. Note that this selection is only applicable to the
alarms displayed on this page.
Select Save to store data on the unit after all elds have been congured. Select Cancel and follow the prompted instructions to revert
back to the previous settings. The data will not be stored in this case.