8
additional parts
Additional parts are not supplied with the TM3 Unit. These parts are installation specific and are supplied
by the installer.
NTC temperature sensors
Analogue sensor.
humidity/temperature sensor (dry contact)
Alerts are activated by means of a contact closing/opening when threshold is reached.
flood sensor
The water detector will detect potential ood risks in the server room caused by condensation water form air cons or burst
water pipes.
4-20mA current transducer
Monitor the amperage of ups and generator distribution boards.
4-20mA humidity sensor
Monitor humidity in server rooms. High humidity – condensation. Low humidity – static.
smoke detector sensor
An important addition to security and safety. These smoke detectors are easy to install and congure. The smoke detector must be
mounted on the ceiling for maximum smoke detection.
door contact sensor
Monitor and be alerted when there is access to server rooms, server cabinets.
To Next Page
Loading...