RT Systems TM3 User Manual

4141
disable/enable all alarms
By selecting the Disable/Enable All Alarms key, all alarms will be disabled. Indication of this condition is displayed on the LCD as well as
on the right top corner of the Home Page. To enable all alarms the Disable/Enable All Alarms key must be pushed again. Alarms will
enable after one hour if the Disable/Enable All Alarms key is not selected within the hour.
clock
Refer to the initial conguration section for the time and date conguration on page 13.
enter
Press Enter to select the telemetry menu where raw input data can be viewed. The following screen will appear:
Press Enter again to view ADC telemetry data. The following data can be viewed:
n Input voltage level
n Temperature sensors 1 to 4
n Flood sensors 1 and 2
n 4-20mA sensors 1 to 3
n GSM signal strength
To return to the main menu, press the Left/Clock/Cancel key.

RT Systems TM3 Specifications

General

Brand	RT Systems
Model	TM3
Category	Measuring Instruments
Language	English