RT Systems TM3 User Manual

36
SNMP configuration page
From the Home Page of the TM3 Monitoring Unit select Conguration Page and from the option list select SNMP. The following page
will be displayed:
The following data can be configured:
n SNMP Manager IP address 1 IP Address to where SNMP traps are sent.
n SNMP Manager IP address 2 IP Address to where SNMP traps are sent.
n SNMP Manager IP address 3 IP Address to where SNMP traps are sent.
n SNMP Version 3 support Select between SNMP version 1 and SNMP version 3.
n SNMP v3 User Enter the Read Community for version 1 or the User name for version 3,
depending on the selection of point 4.
n SNMP v3 Password Enter the Write Community for version 1 or the Password for version 3,
depending on the selection of point 4.
Select Save to store data on the unit after all elds have been congured. Select Cancel and follow the prompted instructions to revert
back to the previous settings. The data will not be stored in this case.

RT Systems TM3 Specifications

General

Brand	RT Systems
Model	TM3
Category	Measuring Instruments
Language	English