RT Systems TM3 User Manual

24
analogue alarms configuration page
transmission selection
From the Home Page of the TM3 Monitoring Unit select Analogue Alarms Conguration Page and Transmission Selection. The following
page will be displayed:
The following data can be configured:
n SMS tick box Select which alarms will be sent by SMS.
Select Save to store data on the unit after all elds have been congured. Select Cancel and follow the prompted instructions to revert
back to the previous settings. The data will not be stored in this case.

RT Systems TM3 Specifications

General

Brand	RT Systems
Model	TM3
Category	Measuring Instruments
Language	English