2
product description
The TM3 Monitoring Unit is a generic environmental monitoring system, capable of interfacing to various
sensors and communicating sensor status on Ethernet (web based), GSM and SNMP. Sensors which can be
connected include NTC temperature sensors, flood sensors, dry contacts and third party 4-20mA sensors.
introduction
The unit can be congured through the web interface and by SMS. Temperature Thresholds can also
be congured on the front panel keypad interface. Sensor levels and thresholds, alarm descriptions,
alarm proles, contact details and communication data are congurable on the unit.
The TM3 Unit is capable of logging alarms and analogue sampled data which can be viewed from the
web interface. Images from a network enabled camera can be viewed on the web interface. Two
onboard relays for controlling external devices and a 12Vdc and 18Vdc power supplies are available on
the unit. The unit has battery backup capability during mains power failure. Onboard SD card saves all
programmed information. In the event of a unit failing the SD card is removed from the faulty unit and
inserted into a new unit and the TM3 is ready to monitor.
To Next Page
Loading...
Need help?
General