RT Systems TM3 - General System Settings

34
general configuration page
From the Home Page of the TM3 Monitoring Unit select Conguration Page and from the option list select General. The following page
will be displayed:
The following data can be configured:
n SITE ID of TM3 Enter a unique identication for the unit.
n Predened Time Delay for discrete alarm inputs Select the discrete alarms time delay. This is the elapsed time from activation
of the alarm until the alarm is reported. Selection between 1 and 10 seconds
are available.
Select Save to store data on the unit after all elds have been congured. Select Cancel and follow the prompted instructions to revert
back to the previous settings. The data will not be stored in this case.