Name: RT Systems TM3
Brand: RT Systems
Rating: 4 (1 reviews)

To Next Page

To Previous Page

2525

analogue names

From the Home Page of the TM3 Monitoring Unit select Analogue Alarms Conguration Page and Analogue Names. The following page

will be displayed:

The following data can be conﬁgured:

n Name Tag This is the alarm name which uniquely identies the alarm.

n LCD Identier Enter the alarm condition description for the LCD.

n Enable/Disable Three selection options are available:

1 = Enable

Notication of alarm will be made on the LCD and SMS

if selected.

0 = Disable

Notication of alarm is disabled. The daily Disabled Alarms

report will include all disabled alarms.

P = Permanently Disabled

Notication of alarm is disabled and is not

included in the Disabled Alarms report.

Select Save to store data on the unit after all elds have been congured. Select Cancel and follow the prompted instructions to revert

back to the previous settings. The data will not be stored in this case.

Questions and Answers:

Need help?

Do you have a question about the RT Systems TM3 and is the answer not in the manual?

RT Systems TM3 Specifications

General