42
The TM3 Monitoring Unit can be congured and interrogated using SMS messages. The SMS commands are listed below. Included on
the utility CD is a software utility MonitorProg.exe which can be used for conguration of the unit. Refer to the help function of the
software for operator instructions.
Message Structure Symbol Descriptions:
= Space
Y = Relay 1 or 2
YY = Alarm Number
XX = Minutes
no. sms message text description command
string value
valid message structure
general
1 What is your Site ID? abc123 abc123
2 What is your signal strength? dabc12 dabc12
3 What is your time, day and date? 9aaaaa 9aaaaa
4 What is the software version of the Operating System? nBg006 nBg006
contacts
what is name and number of contact
5 What is the name and number of Contact 1? Anjm46 Anjm46
6 What is the name and number of Contact 2? Lmki12 Lmki12
7 What is the name and number of Contact 3? Alop12 Alop12
8 What is the name and number of Contact 4? 192ui7 192ui7
9 What is the name and number of Contact 5? zzxxcc zzxxcc
10 What is the name and number of Base station 1? 1op901 1op901
11 What is the name and number of Base station 2? anqoka anqoka
12 What is the name and number of Self Test Computer? cvbnam cvbnam
13 What is the name and number of Un-cleared/Disabled Alarms? qpoilm qpoilm
14 What is Name and No. of Global Alarm Contact? tsv319 tsv319
alarm status
15 Disable all alarms hgFeda hgFeda
GSM sms data access
To Next Page
Loading...
Need help?
General