RT Systems TM3 - Back Panel Connections

6
item description
1
GSM ANTENNA
CONNECTOR
SMA connector for GSM antenna connection.
2 VOLTAGE OUTPUT Provides one 18V dc, 50mA voltage output for sensor supply voltage.
3 4-20MA INPUTS Three 4-20mA inputs available for connecting third party sensors.
4
TEMPERATURE
SENSOR INPUTS
Four inputs available to connect NTC temperature sensors.
5
FLOOD SENSOR
INPUTS
Two inputs available for multiple ood sensors in series terminated with a 10k end of line resistor.
6 VOLTAGE OUTPUT Provide two 12V dc, 200mA voltage outputs for sensor supply voltage.
7
DRY CONTACT
INPUTS
Eight dry contacts available for dry contacts.
8
DRY CONTACT
INPUTS
Seven dry contacts available for dry contacts.
9 RELAY OUTPUTS Used for relay controlled external devices.
10
10/100 BASE-T
NETWORK PORT
Provides for a 10/100 Base-T network connection with status and link LEDs indicate network trafc.
11 ON/OFF On/Off switch for unit power.
12 INLET FUSE Provides for input power protection. See maintenance parts for fuse rating.
13 AC LINE INLET Provides for the input power connection. See specication on page 54 for voltage information.
back panel
1 2 54 6 7 8 93
10 131211