3131
Note 1: Hysteresis represents the difference between the alarm activation set point (threshold) and the alarm cleared value. For example,
temperature sensor 1, non-critical alarm will be triggered at 26° C when the temperature increases, the alarm will be de-activated below
24° C due to the configured 1° C hysteresis. The following figure explains hysteresis further.
Select Save to store data on the unit after all elds have been congured. Select Cancel and follow the prompted instructions to revert
back to the previous settings. The data will not be stored in this case.
23°C
Alarm Triggered
Temperature increase
Temperature decrease
Alarm de-activated
25°C 26°C
To Next Page
Loading...