RTI TheaterTouch T2 User Manual

Chapter 2 • Introduction
11
TILT SWITCH
This button displays a window that allows you to adjust the settings for the
built in tilt switch, which is a device that turns the remote on when tilted past
a 45 degree angle.
On
means the tilt switch is active and will turn on display and backlight
when picked up.
Off
means the tilt switch is inactive.
Press the
OK
button in the window to close.
PROGRAM LOCKOUT
This button displays a window that allows you to turn the program lockout
feature on and off. This is used to lockout un-authorized users from the
Computer Link
mode, so that the program cannot be altered.
If the
Lockout
feature is enabled, you will need to enter the current passcode
before you can change this setting.
On
means the
Computer Link
mode is locked and can only be accessed with
the passcode.
Off
means the
Computer Link
mode is unlocked and can be accessed without
a passcode.
Press the
OK
button in the window to close.

RTI TheaterTouch T2 Specifications

General

Brand	RTI
Model	TheaterTouch T2
Category	Remote Control
Language	English