TheaterTouch System Controller
14
IR CAPTURE
This button displays a window that allows the TheaterTouch to align, learn,
and test infrared commands from donor remotes. Used together with the
TheaterTouch Designer Infrared Library Manager software you can create a
custom database of infrared commands.
The use of the IR Capture command is described in chapter 6 “IR Library
Manager”.
To exit
IR CAPTURE
mode, press the Main Menu button on the remote.
CLEAR ALL
This button displays a window that will allow you to erase the current
program in the TheaterTouch remote. When the button is pressed, you will be
prompted to enter the current passcode. If the proper code is entered, the
entire program in the TheaterTouch will be erased.
Warning!
This will erase the complete program in the TheaterTouch with no
way to restore it, except by reloading the program from the TheaterTouch
Designer software!
If you inadvertently press the
CLEAR ALL
button, simply press the
ENTER
button without entering the passcode
and you will be returned to the Control
Panel page.
To Next Page
Loading...
Need help?
General
