To Next Page

To Previous Page

TheaterTouch System Controller

OUTPUT TAB

The options on the

Output

tab are:

Output Type:

Unless the system contains a mixture of direct IR and IRF-6/RF commands, this

option will not normally need to be changed.

Default -

Select this option to set the default output type for this button to the

system default. The system default is the option selected with the

Edit

Remote Properties

command on the

Edit

menu.

IR -

Select this option to force this button to transmit IR directly out the

infrared window on the front of the remote, regardless of the system setting.

RF -

Select this option to force this button to transmit IR or RS-232 via RF

through the IRF-6, regardless of the system setting.

RF ID Code:

Unless the system contains more than one IRF-6, this option will not normally

need to be changed.

Default -

Select this option to set the default RF ID code for this button to the

system default. The system default is the ID code selected with the

Edit

Remote Properties

command on the

Edit

menu.

Code -

Select this option to force this button to transmit a specific RF ID code

when in RF mode, regardless of the system default setting.

System Defaults -

This section shows the global defaults for the output type and RF

ID code, for reference. If you wish to change these values, use the

Edit Remote

Properties

command on the

Edit

menu.

Brand	RTI
Model	TheaterTouch T2
Category	Remote Control
Language	English

RTI TheaterTouch T2 User Manual

Table of Contents

Questions and Answers:

RTI TheaterTouch T2 Specifications

Related product manuals