Ruida Technology RDC6332G - Chapter 8 Operating Instruction of Panel; 8.1 The Keys Introduction; 8.1.2 Introduction to the keys

RDC6332G Control System User Manual
27
/
47
© 2015 Ruida Technology. All Rights Reserved
Chapter 8 Operating Instruction of Panel
8.1 The Keys Introduction
8.1.1 Introduction to the whole panel
8.1.2 Introduction to the keys
 “Reset” Key :Reset the whole system;
 “Origin” Key :Set the locating point;
 “Laser” Key : Laser tube to emit;
 “Frame” Key :To track by the current file’s frame;