Ruida Technology RDC6332G - 8.2 Introduction to the interface functions

RDC6332G Control System User Manual
29
/
47
© 2015 Ruida Technology. All Rights Reserved
 “Numeral” Keys ~ :To set the parameters quickly;
 “Dot” Key :To set the parameters quickly;
 “CL” Key :To modify parameters;
8.2 Introduction to the interface functions
8.2.1 The screen of power on
When the system is powered on, the screen will show as below:
This power on screen can be changed by user. If the user-defined graph is downloaded by the
PC software, when restart the system, it will show the new graph.
Figure: 8.2-1