RuiDa RDC6563F - Page 28

RDC6563F Standalone Fiber Cutting Control System User Manual V2.0 27
SHENZHEN RUIDA TECHNOLOGY CO., LTD
Sanyo R series servo drive wiring instructions
Sanyo R series servo drive parameter setting instructions
Parameter NO.
Settings
Description
SY08
01
Set to speed mode
Gr0.00
00
Set to auto-tune
Gr8.25
500
Speed gain is set to 500r/min/V
Gr9.00
00
Allow the motor to rotate forward
Gr9.01
00
Allow motor reversal
GrC.05
2500/32768
The encoder pulse value is 10000