RuiDa RDC6563F - Page 27

RDC6563F Standalone Fiber Cutting Control System User Manual V2.0 26
SHENZHEN RUIDA TECHNOLOGY CO., LTD
Panasonic A5 series servo drive wiring instructions
Panasonic A5 series servo drive parameter setting instructions
Parameter NO.
Settings
Description
Pr0.01
1
Set to speed mode
Pr0.02
3
Set to auto-adjust in real time
Pr0.03
17
Set servo stiffness
Pr0.11
2500
The encoder pulse value is 10000
Pr3.02
500
Speed gain is set to 500r/min/V
Pr3.15
1
Zero speed clamp is valid
Important:
Here only some parameters are recommended to ensure that the
servo motor can move normally. If you want the servo motor to
have better motion, you need to ask the professional to debug.