s::can con::cube D-330 - 1 General

1 General
Thismanualcontains,rstly, general information (chapter 1) and safety guidelines (chapter 2).Thenextchapter(chapter
3) provides a technical description of the s::can product itself as well as information regarding transport and storage of the
product. In further chapters the installation (chapter 4) and the initial startup (chapter 5) are explained. Furthermore information
regarding calibration of the device (chapter 6), data management (chapter 7), how to perform a functional check (chapter 8)
and maintenance (chapter 9) can be found in this manual. Information regarding troubleshooting (chapter 10), the available
accessories(chapter11)andthetechnicalspecications(chapter12)completethedocument.
Each term in this document that is marked italic and underlined, can be found on the display of your controller for operation
or as lettering on your s::can product.
In spite of careful elaboration this manual may contain errors or incompletion. s::can does not assume liability for errors or
loss of data due to such faults in the manual. The original manual is published in English and German by s::can. This original
manual serves as the reference in case discrepancies occur in versions of the manual after translation into third languages.
Thismanualandallinformationandgurescontainedthereinarecopyrighted.Allrights(publishing,reproduction,printing,
translation, storage) are reserved by s::can Messtechnik GmbH. Each reproduction or utilisation outside the permitted limits of
the copyright law is not allowed without previous written consent from s::can Messtechnik GmbH. The reproduction of product
names, registered trade names, designation of goods etc. in this manual does not imply that these names can be used freely
by everyone; often these are registered trade marks, even if they are not marked as such.
This manual, at the time of its publication (see release date printed on the top of this document), concerns the s::can products
listedinchapter3.Informationandtechnicalspecicationsregardingtheseitemsins::canmanualsfromearlierreleasedates
are herewith replaced by this manual.
The electronic version (pdf-document) of this manual
is available on the s::can Customer Portal (Services for
Customer) of the s::can Homepage (www.s-can.at).
con::cube D-330, 01-2020 Release
www.s-can.at
Copyright © s::can Messtechnik GmbH
5 / 42