s::can con::cube D-330 - 3.4 Storage, Transport and Disposal

Ensure correct orientation of mounting rails. Top of con::cube
hastobetiltedbackwardstopreventanywaterowingoverthe
touch screen or entering the housing when device is opened.
Dimensions of con::cube in mm
3.4 Storage, Transport and Disposal
Thelimitingvaluesfordevicestorageandtransport,whicharedescribedinthesectiontechnicalspecications,havetobe
observed at all times. The device shall not be exposed to strong impacts, mechanical loads or vibrations. The device should
be kept free of corrosive or organic solvent vapours, nuclear radiation as well as electromagnetic radiation.
Damage to the device caused by wrong storage will not be covered by warranty.
Transport should be done in a packaging that protects the device (original packaging or protective covering if possible).
This product is marked with the WEEE symbol to comply with the European Union’s Waste Electrical & Electronic
Equipment (WEEE) Directive 2012/19/EC. The symbol indicates that this product should not be treated as household
waste. It must be disposed and recycled as electronic waste. Please assist to keep our environment clean.
Take care that no sharp-edged or heavy objects are placed on the housing cover, which might scratch and / or
damage the touch screen.
con::cube D-330, 01-2020 Release Copyright © s::can Messtechnik GmbH
www.s-can.at10 / 42
!
!