Safe Fleet DH4C - Time and Date

© Safe Fleet | 2020 | All rights reserved | Part #: 700-1213 R1
DH4C Installation Guide
p. 24
DH4C Basic Conguration
Time and Date
Ensure that the Time/Date settings are correct for the customer location/time zone - the DVR date and time are used as an
index for searching, archiving, and downloading video, and appear during playback.
To update Date/Time settings:
1. Select Time/Date to display the tab.
2. Select elds and/or use menus to make your changes
(menu options are described below). For details on entering
data with the mouse, see DH4C Operation: Using On-screen
Keyboards.
3. Click Back to save the settings and return to the
Conguration menu.
MENU ITEM DESCRIPTION
Daylight Saving Leave ON and at default dates unless in an area that does
not use daylight savings (e.g. Arizona, Saskatchewan).
Click DST Settings and ensure the Start/End dates and
times apply to your location.
[ON]
Time Zone Select your local time zone. [UTC-05 Eastern Standard Time]
Time Format Choose 12 or 24-hour display. [12 hour]: 12:00 am to 11:59 pm
[24 hour]: 00:00 to 23:59
Time Input the correct time
Date Format Select the preferred date format [MM/DD/YYYY]
[YYYY/MM/DD]
[DD/MM/YYYY]
Date Set the date for the DVR.
GPS Time Sync If GPS is installed, set this ON to have the system time
automatically updated when satellites are detected.
[OFF]
Menu Options