SAGEM-LINK F 288055571-04
Installation and Operation Manual
Page 89/142
Issue 04 : July 2005
Reproduction and communication prohibited without the written permission of Sagem Communication
Transmit and Receive switches are independent one from each other. A system can work with
transmitter from main ODU (Tx1) and with receiver from standby ODU (Rx2).
In normal operation, transmitter and receiver switches are in "Auto" position.
To force one transmitter or one receiver in manual position, click on the case close to the
corresponding unit. In the example below, standby transmitter and receiver have been selected.
The system is now in maintenance mode. The yellow LED in IDU front panel flashes and a red
maintenance indication is displayed on the main Pilot screen status bar.
To Next Page
Loading...