SAGEM-LINK F 288055571-04
Installation and Operation Manual
Page 90/142
Issue 04 : July 2005
Reproduction and communication prohibited without the written permission of Sagem Communication
Maintenance mode
Local Equipment
Standb
Tx and Rx are active
Equipment Configuration (1+1 only)
Refer to section 3.2.4.9.
Information (local or remote)
When clicking on this menu the following window appears :
Enter antenna type
Enter here cable
Information
Enter a text (stored in the
IDU flash memor
Enter here all information which should be useful for link management (this information can be read
from the network management).
3.3.7.3 - Config Tools
When clicking on the config Tools menu, the following windows appears :
To Next Page
Loading...